-
Big Wide Chopped Strand Mat for FRP Panel
Big Width Chopped Strand Mat isetyenziselwa ngokukodwa ukuvelisa: FRP eqhubekayo ipleyiti / sheet / panel.Kwaye le FRP ipleyiti / sheet isetyenziselwa ukuvelisa i-foam sandwich panels: iipaneli zeenqwelo zefriji, iipaneli zelori, iipaneli zokuphahla.
Ububanzi bomqulu: 2.0m-3.6m, kunye nephakheji yekreyithi.
Ububanzi obuqhelekileyo: 2.2m, 2.4m, 2.6m, 2.8m, 3m, 3.2m.
Ubude bokuqengqeleka: 122m & 183m
-
I-Emulsion Fiberglass yanqunyulwa i-Strand Mat ngokukhawuleza i-Wet-Out
I-Emulsion Chopped Strand Mat (CSM) iveliswa ngokunqunqa i-roving edibeneyo ibe yi-50mm ubude bemicu kwaye isasaze le micu ngokungenamkhethe kwaye ngokulinganayo kwibhanti ehambayo, ukwenza i-mat, emva koko i-emulsion binder isetyenziselwa ukubamba imicu kunye, emva koko i-mat isongiwe. kumgca wemveliso ngokuqhubekayo.
I-Fiberglass emulsion mat(Colchoneta de Fibra de Vidrio) ihambelana ngokulula neemilo ezintsonkothileyo (iigophe kunye neekona) xa imanziswe ngepolyester kunye nevinyl ester resin.I-emulsion mat fibers idityaniswe kufutshane kune-powder mat, amaqamza omoya amancinci kune-powder mat ngexesha le-laminating, kodwa i-emulsion mat ayinakuhambelana kakuhle ne-epoxy resin.
Ubunzima obuqhelekileyo: 275g / m2 (0.75oz), 300g / m2 (1oz), 450g / m2 (1.5oz), 600g / m2 (2oz) kunye ne-900g / m2 (3oz).
-
Isigqubuthelo sePolyester (Asingavulekanga)
Isigqubuthelo sepolyester (i-poliester velo, ekwabizwa ngokuba yi-Nexus veil) yenziwe ngokomelela okuphezulu, ukunxiba nokukrazula i-polyester fiber, ngaphandle kokusebenzisa nayiphi na into encamathelayo.
Ifanelekile: iiprofayili ze-pultrusion, umbhobho kunye nokwenza i-tank liner, iindawo ze-FRP ze-surface layer.
Ukuchasana nokugqwesa okugqwesileyo kunye ne-anti-UV.Ubunzima beyunithi: 20g / m2-60g / m2.
-
Imathi ethungelweyo (EMK)
I-Fiberglass stitched mat(EMK), eyenziwe ngeentsinga ezinqunqiweyo ezilinganayo (malunga nobude obuyi-50mm), emva koko ithungelwe kwimethi ngomsonto wepolyester.
Omnye umaleko wesigqubuthelo (i-fiberglass okanye i-polyester) inokuthungelwa kule mat, ukwenzela i-pultrusion.
Isicelo: inkqubo ye-pultrusion yokuvelisa iiprofayili, inkqubo yokujika i-filament ukuvelisa itanki kunye nombhobho,…
-
Umgubo Wanqunyulwa Strand Mat
I-Powder Chopped Strand Mat (CSM) iveliswa ngokunqunqa i-roving ibe yi-5cm ubude bemicu kwaye isasaze iintsinga ngokungacwangciswanga nangokulinganayo kwibhanti elishukumayo, ukwenza i-mat, emva koko i-powder binder isetyenziselwa ukubamba iintsinga kunye, emva koko i-mat iqengqeleke ibe yintsimbi. qengqeleka ngokuqhubekayo.
I-Fiberglass powder mat (iColchoneta de Fibra de Vidrio) ihambelana ngokulula neemilo ezintsonkothileyo (iigophe kunye neekona) xa imanziswe ngepolyester, i-epoxy kunye nevinyl ester resin, sisetyenziswa ngokubanzi fiberglass yesiko, yakha ubukhulu ngokukhawuleza ngexabiso eliphantsi.
Ubunzima obuqhelekileyo: 225g / m2, 275g / m2 (0.75oz), 300g / m2 (1oz), 450g / m2 (1.5oz), 600g / m2 (2oz) kunye ne-900g / m2 (3oz).
Qaphela: i-powder cut strand mat inokuhambelana ngokupheleleyo ne-epoxy resin.
-
I-Filament Mat eqhubekayo ye-Pultrusion kunye ne-Infusion
Continuous Filament Mat (CFM), iqulathe imicu eqhubekayo randomly orientated, le micu yeglasi idityaniswe kunye ne-binder.
I-CFM yahlukile kwi-strand mat enqunqiweyo ngenxa yeentsinga zayo ezinde eziqhubekayo kunokuba iintsinga ezinqunqiweyo ezimfutshane.
I-filament mat eqhubekayo isetyenziswa ngokuqhelekileyo kwiinkqubo ze-2: i-pultrusion kunye ne-close molding.ukufakwa kwe-vacuum, ukubunjwa kwe-resin transfer (RTM), kunye nokubunjwa koxinzelelo.
-
I-Infusion Mat / i-RTM Mat ye-RTM kunye ne-L-RTM
I-Fiberglass Infusion Mat (ekwabizwa ngokuba yi-Flow Mat, i-RTM Mat, i-Rovicore, i-Sandwich Mat), edla ngokuqulatha iileya ezi-3, iileya ezi-2 zomphezulu kunye ne-mat enqunqiweyo, kunye ne-core layer kunye ne-PP (i-Polypropylene, i-resin flow layer) yokuhamba ngokukhawuleza kwe-resin.
I-Fiberglass sandwich mat isetyenziselwa ikakhulu: i-RTM(i-Resin Transfer Mold), i-L-RTM, i-Vacuum Infusion, ukuvelisa: iindawo zemoto, ilori kunye nomzimba wetreyila, ukwakhiwa kwesikhephe...
-
Isigqubuthelo sePolyester (esiApertured) sePultrusion
Isigqubuthelo sepolyester (i-poliester velo, ekwabizwa ngokuba yi-Nexus veil) yenziwe ngokomelela okuphezulu, ukunxiba kunye nokukrazula i-polyester fiber, ngaphandle kokusebenzisa nayiphi na into encamathelayo.
Ifanelekile: iiprofayili ze-pultrusion, umbhobho kunye nokwenza i-tank liner, iindawo ze-FRP ze-surface layer.
Isigqubuthelo sokwenziwa sePolyester, esinobuso obufanayo obugudileyo kunye nokuphefumla kakuhle, siqinisekisa ukunxulumana kweresin elungileyo, ukumanzisa ngokukhawuleza ukwenza umaleko otyebileyo wentlaka, ususa amaqamza kunye nemicu yokugquma.
Ukuchasana nokugqwesa okugqwesileyo kunye ne-anti-UV.
-
I-Fiberglass Veil / i-Tissue kwi-25g ukuya kwi-50g / m2
Isigqubuthelo se-Fiberglass sibandakanya: iglasi ye-C, iglasi ye-ECR kunye neglasi ye-E, ukuxinana phakathi kwe-25g / m2 kunye ne-50g / m2, isetyenziswa kakhulu ekubunjweni okuvulekileyo (isandla sibeka phezulu) kunye nenkqubo yokujikeleza kwe-filament.
Isigqubuthelo sokubekwa kwezandla phezulu: Amalungu e-FRP angaphezulu njengomaleko wokugqibela, ukufumana umphezulu ogudileyo kunye nokuchasana nokubola.
Isigqubuthelo sokwenza umsonto: itanki kunye nokwenza umbhobho welayini, i-anti corrosion liner yangaphakathi yombhobho.
I-C kunye ne-ECR yesigqubuthelo seglasi ine-anti-corrosion performance engcono ngakumbi phantsi kweemeko ze-asidi.
